fried board

[Marbalfire]

i just finished charging my speed and turned it on and started playing with it. I kept pulling the trigger and would not hear the solenoid click, then the gun turns off all together and will not turn back on. so i open up the grip to make sure eerything is connected and while im in there sniff the board and it smelt like a burnt piece of plastic, which i assume thats what it it now. By the way i used wdp's car charger and have charged it like 10 times before in the same vehicle with no problems. will the price of the board and installation be covered under warranty?

[cobra-lcd]

call wdp or the place you bought it from and they might give you a new one. if not try calling the angel guy

[BONES]

Yeah they should if you have a lifetime warrenty, who did you buy it from?

[deadeye_85]

when the guns on but without air, and I pull the trigger should I hear a click? Mine seems to be woking fine, but I dont hear the solenoid clicking like I do in my Shocker?

[BONES]

Unscrew you grip and make sure your board is able to touch with your trigger......Who know, maybe your board is to far back, doubt this is it but what the heck?

[SkeL]

Marbalfire: as long as you didn't do anything else, this shouldn't cost you anything to fix. Call up the person you bought it from. If it was from an online place, call them and ask if they can fix it. If not, send it to a sponsor. IT should be under the warranty, so they have to fix it.

Deadeye: After the bootup process, you should hear the solenoid click. Not a loud one, but you can still hear it. Open up your grip cheek and make sure it's plugged in. Do you notice anything different on the board? There should only be one light blinking after it's done booting up. If you see 3, that means your trigger needs to be backed out. Let us know.