Low Rise for Speed?

[BONES]

Hey everyone I know I have posted this in the chat thread but no one seems to be reading it there. Sorry if this is a repost, I did do a search and came up with nothing.



I have a dust silver speed and I'm looking to put a low-rise on it. I can't find one that is dust silver. Anyone have any suggestions on what low rise I should put on my speed? I would appriciatte it if you would just give me a link to one you think would best fit a silver dust speed. It doesnt have to be dust silver either, any color scheme that you think would look cool is also appriciated. Thanks a lot everyone. Also, I have an evo2 and I sanded down the feedneck to fit the stock high rise on the speed. So it would be great if the low rise you suggest would be able to fit a sanded feedneck of the evo2. Thanks a lot!

Sincerely,

BONES


__________________

[p8ntballdude]

a+ sells a silver dust low rise. lowest available for angels 2. not sure of there website tho.

[Razor]

They dont answer mails... At least not mine.

www.aplusp8ntball.com

[p8ntballdude]

they were at iao, thats where i got mine. they also sell em on ebay.

[BONES]

I think I'm going to use a chipley low rise, probably chrome. Anyone else use this one?

BONES

[Marbalfire]

i have a black wdp twist lowrise and it looks nice on the silver gun, especially with a black barrel, but the feedneck is the same as the stock feedneck, so your sanded evo 2 should fit, my halo did.

[BONES]

Thanks for your 2 cents.

BONES

[shinnycocker]

Chipley Rise
Myself and A.Sanidad use them, I like the look of them and the quality is A+

[BONES]

Sweet, tomarrow I'll call my local proshop and see if they have any in. Thanks all.

BONES

[jabbster]

Does Chipley have a website??? I am getting either theirs or A+'s low rise...

Sincerely,

The jabbster

[BONES]

Yeah it's www.chipleymachine.com

Sincerely,

BONES

[frstrtdmac]

a+ didnt respond to mine either.. So i just bought one from ebay.. i think the dude's link is skullpaintball@hotmail.com not dust but works great! no chops with halo b te software..

[jdp72]

Wow didn't see any A+ Low Rises on Flea-Bay...so I just ordered it from them directly. I hope I didn't over pay too much, and I hope the Silver Dust is a good match with my Speed Silver Dust. BTW, how much were they going for on Flea-Bay???

[DaddyDik]

they R 21$ + 5$ shipping


let us know how the dust silver anno is matched.

-=DD=-

[frstrtdmac]

well the silver is the same silver.. but not dusted unless you buy from A+..

[BONES]

Does chipley sell them in silver dust? If they don't what color do you think would look cool with my silver speed?

[Razor]

Well, A+ has answered my mail now , so Im going to buy one of their lowrises. Pretty cool that they have them in dust anodizing.

Would have been cool with some pics, to see how they fit.

[BONES]

sick I will probably buy one too. Thanks for info. Razor.

[Razor]

Just sharing the love with my Angel bothers :rrrright:

[jdp72]

I paid $33 + $8 shipping, let's see if the $15 was worth it for the SILVER DUST. Will report back with color match results. Possibly even pictures, if I can figure out a way to post them.

Here's a dumb question... Do you just unscrew the old feed tube and rescrew in the new one? I tried to unscrew it last night with no success. I didn't want to use tools and risk scratching anything, and I wasn't sure if there was locktite involved and a little heat was needed.

[Razor]

Heat will ALWAYS help, loctite involved or not. Makes the molecyles in the material "looser" :doh:

[BONES]

Originally posted by jdp72
Here's a dumb question... Do you just unscrew the old feed tube and rescrew in the new one? I tried to unscrew it last night with no success. I didn't want to use tools and risk scratching anything, and I wasn't sure if there was locktite involved and a little heat was needed.

Yes you do unscrew the old high rise and yes you do screw in the new low rise you bought. Yes loctite is in there, WDP put some on. I would recommend (Since you don't want to scratch your marker) you get cloth or something and wrap it around your high rise and then take pliers (sp) or something and try to unscrew it.

I have also heard of people taking hair dryers and putting them blowing the hot air into the feedtube to try to "melt" the loctite a little bit, and then they unsccrew it.

Good luck and good luck with pics.

[frstrtdmac]

CAUTION.. DO NOT USE A TOWEL AND A WRENCH!!! YOU WILL SCRATCH THE HELL OUT OF YOUR PRODUCTS..

Now getting that out of the way and 2 rises later.. use a strap wrench.. wont damage anything, and put an incredible amount of torque on any piece you need to remove! Trust me.. Unless you want to jack your newly bought low rise ie:$35.. do this!!!

[jdp72]

I was thinking of using the strap wrench... Would it be wise to put some blue loctite on the new feed tube, or should I not worry about it. (I will never use RED again, especially after a stripped head/E-Z out incident on my Harley... Major PIA!)

[BONES]

Yeah use a less strong loctite.

PS how are the pics coming?

[jdp72]

The feeder tube and volumizers should be here by Friday, so I can take pics then. Can anyone host my pics when I get them ready? I'm not sure how to post them on here...

[BONES]

If you email them to me I will. PM me when you are ready and Ill give you my email address. Jsut make sure they arent over about 200000bytes, its like 310kb at the max.

[jdp72]

Will do... Thanks...

[BONES]

Dont forget to PM me first. If you jstu email from my profile it will go to an email I usually don't use. I only check it every once in a while

[jeezalex]

has anyone seen the blue dust?
i wonder if it will match my blue dust speed...

[jdp72]

The Silver Dust is a perfect match, as far as I can tell...
http://groups.msn.com/ChicagolandPaintballers/shoebox.msnw

[Vapaintballer400]

awesome

[jabbster]

Sick, I am getting a black one for my speed demon.

Sincerely,

The jabbster

[titansu]

Looks sharp. Any problems opening the breach?


Originally posted by jdp72
The Silver Dust is a perfect match, as far as I can tell...
http://groups.msn.com/ChicagolandPaintballers/shoebox.msnw

[jdp72]

Originally posted by titansu
Looks sharp. Any problems opening the breach?

No problems opening the breech... It's low, but not that low... The door can still swing open. There are only 2 issues with it:

1. The finish is so smooth that I cannot get a good grip on it, not like THE GRIPPER for the cocker. So really tighening it down is tough.

2. There is like a 2 mm gap all around it, as the stock one was slightly thicker... So if you take a low hopper/feedtube hit and you get paint or shell in there good luck getting it out.

Consequently if you take a hit there, good luck trying to take off your hopper for the day. The paintball oil and the smooth finish make it IMPOSSIBLE to get a good grip to take it off.

[BONES]

I got a CCW low rise a few days ago. Works great! Thanks all.

[Ninety2SiR]

I'm getting one, that looks sweet.

[pntbalmatt]

haha, A+ has the best website ever! ac/dc in the introduction.. so awesome...

[rags]

dos anybody know the e.mail adress of ccm i would like to buy the low rise
but can not get in touch whit them
thanks .

[Razor]

Black dust A+ lowrise.

[Ed Braunbeck]

Razor, Where did you get the A+ lowrise? I can't seem to find the things anywhere?

[joda]

the dust blue lowrise is noticeably darker than my speed... oh well

[golobulus]

Originally posted by jeezalex
has anyone seen the blue dust?
i wonder if it will match my blue dust speed...

i got a blue one and it doesn't match too well...but it'll do...

[golobulus]

question for all you aplus owners, have you guys found a good way to tighten down your halos? mine still rocks a bit even though it may be tight and not turn.

[acoenfam1]

Originally posted by pntbalmatt
haha, A+ has the best website ever! ac/dc in the introduction.. so awesome...

Got a link???

[jdp72]

Originally posted by golobulus
question for all you aplus owners, have you guys found a good way to tighten down your halos? mine still rocks a bit even though it may be tight and not turn.


I've got the same issue no matter what I slap on top of it... I've used paper towel, which sorta works. It just looks goofy to have a >$1k setup with papertowel sticking out of it.

[acoenfam1]

Originally posted by jdp72
I've got the same issue no matter what I slap on top of it... I've used paper towel, which sorta works. It just looks goofy to have a >$1k setup with papertowel sticking out of it.

Yea, thats got to look getto as hell. But when it comes down to it whatever works.

[JT2002]

so all you guys with a+ rises, howd u get your old feed off? and did you use any loctite?

[acoenfam1]

We've discussed removing the feed tubes before run a search. As for locktiting the new tube yes use red locktite to secure your new feed.

[JT2002]

well i figure siunce this was a whole thread on the lowrise's id ask here. blue lock
tite is cool right?

[jdp72]

I suggest using BLUE over RED in most all instances... Red is more of a permanent thing.

Getting the stock feed off is a total PIA. Took me an hour of heating and just wiggling back and forth.

[JT2002]

well. its liek xmas all over agian lol, cept on my tab :D. just ordered my silver dust a+ rise, speed manual, ss hammer, love juice, then later my datapimp drop, and tomorrow my flatline tank :D w00t!

[acoenfam1]

Ho Ho Ho!!

[JT2002]

SANTA SANTA!!! Can i sit on your lap?:evilgrin:

[acoenfam1]

WHOA!!!!! Don't ask don't tell... Anyway my wife would get pissed and probably beat the crap outta you.:lol:

Where'd you find the A+ anyway?