Help with Chopping

[Pbnonstop]

My speed is chopping like 2x a hopper, and it never chopped before. It still passes the drop test and chops in both mode 1, and 2. The only thing i can think of is that when i close the breach there is no longer and resistance. Do you think i need to adjust my ram, i don't have the tool yet but if that is the problem i will go buy one. It chops with both my Halo TE, and my Evo-2 Yboard. Thanks for the help AOG is great.

[RVD9431]

where are they breakin, in the breech? If so, ur battery may not be fully charged, and this causes the sensi to mot function correctly, let it charge overnight. If its still havin the same prob, check the input pressure on it, that may be the prob too.

[SkeL]

They could just be barrel breaks....
Have you charged the marker since you've gotten it? Any other problems? sounds like your hammer needs to be adjusted, but I doubt that's the cause.
You say that you don't have a toolkit? IF you get one, check the LPR pressure.
What's your dwell at?

[dark2k2LCD]

make sure sensi is on.

if it is passing the drop test, there are cases where the sensi is too, sensitive and it is detecting balls when they arent there under rapid fire

[Pbnonstop]

It passes the drop test, sensi has worked in the past, i have carged it 2x, i shot about 4 cases of paint throuh it with no chops, now it is chopping. They are in the breach, and the dwell is at 12. I have a dirt volumizer for it as well as a lowrise. Please help

[Casedogg]

Have you taken the sensi rod out and cleaned it?I bet you that's the problem.Because sensi will still pass when you do drop test but when you rip a string the sensi will have too much resistance to work properly with all that paint goop on the rod.Oh ya I found it nice cleaning the sensi tube with pipe cleaners

[Pbnonstop]

Well i got the angel toolkit, lowered my lpr to 65, adjusted my ram, and cleaned sensi, and charged it. Threw my halo on in mode 1 and it ripped like no other. It sounded like a matrix, had no drop off, and didn't chop. It slowed down as my halo did, and sensi was working flawlessly. It is nice to be able to shoot 18bps with out chops again. Thanks guys

[RVD9431]

glad to hear u fixed it.

[Marbalfire]

where can i get an angel toolkit, and about how much will it cost?

[RVD9431]

anywhere online really, paintballgear.com has them under the angel accessories for $41, but its a must to have for any angel owner.

[gabs]

Originally posted by Pbnonstop
Well i got the angel toolkit, lowered my lpr to 65, adjusted my ram, and cleaned sensi, and charged it. Threw my halo on in mode 1 and it ripped like no other. It sounded like a matrix, had no drop off, and didn't chop. It slowed down as my halo did, and sensi was working flawlessly. It is nice to be able to shoot 18bps with out chops again. Thanks guys

65? isn't it supposed to be at 82?

Will lowering it fix my Halo/chop problem or am I missing something.. Is your dwell still at 12?

[BONES]

Originally posted by gabs
65? isn't it supposed to be at 82?

81 actually.