PDA

View Full Version : intellifeed question?

///M3
10-16-2002, 07:20 PM
hey can you only do intellifeed for revys? like no evlutions or halos?
AdrenalinMan
10-16-2002, 07:38 PM
it is my understanding that you can do intellifeed on evos and revvys and thats it.
NASA racer
10-16-2002, 07:40 PM
I had "intellifeed" on my LCD and it was supidifeed...only came on if ROF was over 3rps and that meant tons of dry fire and even ball chopping unless you basically fired continuously. If you had the misfortune of shaking balls out of the neck while running, you were going to get dry fires until you hit 3bps and then you wasted a ton of paint simply trying to get the hopper working.

Was the worst thing I ever did to my marker and went back to a good ole battery powered VL with a Warped upgrade.

Did they change that setup or is it the same as the one I got in 2001?
Emmit
10-16-2002, 08:28 PM
well the Intellifeed on the IR3 is supposed to be programmable so you could ideally program it to spin as soon as you pull the trigger
AdrenalinMan
10-16-2002, 09:18 PM
yes emmit that is true.
Dyelcdangel
10-18-2002, 02:20 PM
There is a way to hook it up the the evolution II. But to be honest, you better off not doing it. The fact that the Evolution II can feed at 17 balls a second, and if you hook it up to the intelefeed, it will only fire at the rate that you shoot the gun. Your better off just not using on. But thats my openion.