PDA

View Full Version : A longer tube

5150
10-15-2002, 11:52 PM
Can you get a longer tube with warp feed you you could shoot longert starands if you were shootin 18 bps auto w/a lcd?
poobrownhorse
10-16-2002, 01:20 AM
I thought LCDs were 12.5bps auto?
Action75
10-16-2002, 03:34 AM
i would imagine so hypothetically...
Monkey2674
10-16-2002, 09:25 PM
With data link they go up to 20bps on full auto.
C.Carles-AOG
10-16-2002, 11:20 PM
it'll cycle at 14bps. mechanically I think that's the LCD's limit.
vinrock
10-17-2002, 12:14 AM
what would be the limiting factor? I'd think it would be airflow, that's pretty gay is the valve itself is only capable of opening/closing 14 times a second. It can't be an electronic limitation, the electronics themselves woud be capable of thousands of executions per second.

I have some video thats claimed to be 30bps from an e-mag, can't remember where i found it. Compared to the 20bps.mov in the download section here, it's noticeably faster, and you can hear the paint splatting on the ground after the guy lets off the trigger. Any ideas how that might've been accomplished? Not the marker pulling that off, but how the hell would he feed paintballs that fast?

I took down my site so I have nowhere to upload the vid, mybad.
poobrownhorse
10-17-2002, 12:30 AM
Is that claimed to be 30 thing some guy shooting at a wood board with an emag+halo?
If so it is 18bps actually, hehe
Its damn cool how he lets off the trig and balls keep hitting target.
I think the ir3 on crack is not actually doing 20bps, but cops is limiting it. hopefully htey will release a new ir3 on crack with cops2
5150
10-17-2002, 01:26 AM
DAMN. . . This is getting off topic, lol. Can you make the tube longer?
5150
10-17-2002, 01:27 AM
Later I will post a pic of hpw they fed that MAg. It was with a home made loder i tell you, home made!
Action75
10-17-2002, 03:10 AM
i dont know entirely. But let me say this, i have a warp feed on my ir3.....and i have yet to out shoot it..period. for example....i filled my 12volt revy with x board with two hundred rounds of paint and then primed the warp ( you have to let the warp feed feed some balls through initially), then topped my hopper off with about 20 more balls. All in all i had about 220-230 balls. i took aim at a wall(actually the side of my friends car, he wasnt too happy but i was pissed at him) and fired as fast as i could semi auto. i got to 15bps according to the rof thing in the lcd screen...but on average i think i was shooting 14bps. I didnt break a singl paintball though, didnt shoot a single blank or shot of air, didnt pinc, had no shootdown, etc etc. My point being, you dont need a longer tube, you really dont.
5150
10-17-2002, 11:58 PM
well i see your point but im just wondering.
poobrownhorse
10-18-2002, 12:15 AM
What would be cool eventually would be a remote warp feed.
Imagine a remote air and remote balls.... That would be a lightweight setup!
You could also had a backpack type thing as the hopper so you would never have to reload.
Monkey2674
10-18-2002, 07:15 AM
Those backpacks allready have been made. There was a pic of one on Warpig before.
Styles Bitchley
10-20-2002, 12:39 PM
You can buy longer tubes from AGD I believe. Just call and tell them what length you need and they can cut it.

With warp if you can get the ROF set to it, an Angel will shoot WELL over 14bps no problem.
Arch-Angel
10-25-2002, 09:38 AM
I have shot my LCD full auto 18BPS with halo B no problem.
5150
10-26-2002, 12:47 PM
Was that with warp?