Air on speed..im trying to run at lp...help

[Flabrgast]

Hi i just got like a 68ci/4500 ci air reg and tank and im trying to get my speed to run at low pressure...somewhere around say 200-300 psi...can I do that with a 4500 ci tank. I guess what im asking is, is it counter productive to have a 4500 tank and trying to run lp..thank you

[matman1]

wat are you talking about

yes of course you can run it lp what do you mean by counter produtive

[bacon bitz]

lol the 4500 psi is the pressure that the tank can handle inside it, the output pressure is hoe you run a gun at low pressure, and yes you can run your speed at 200-300 psi, in fact you can run it at around with a gas-thru and that will be good on the speed

[Emmit]

In order to run the reg with a Low Pressure output you will need to change the spring stack configuration. The AIR comes standard at a HP configuration, the manual will tell you how to change the spring stack to run a LP config. According to WDP this is desireable with the Speed, Ron at Mo's has been able to get his AIR down below 200psi output I believe. Check page 13 of your manual for the LP conversion on the AIR.

[Talfuchre]

Man I am thinking that you don't know enough to own tat cool tank... I think you should give it to me...

TF