PDA

View Full Version : Feedneck with Evo2

Devs
07-06-2003, 04:18 PM
Anybody have suggestions as to which feedneck to get for my LCD? I don't want to sand down my Evo2 cause it fits my bushy just fine. I also don't want to have to buy several different ones to figure out which is best. I don't live close enough to a proshop to make a trip just for a feedneck. Thanks in advance.

Monkey
cryptonomicon18
07-06-2003, 04:19 PM
Get a clamping feed neck off the internet, or put like a piece of paper in the neck to make it tight.
Devs
07-06-2003, 04:30 PM
Thank ya kindly, but where can I find a clamping feedneck?


Monkey
cryptonomicon18
07-06-2003, 04:40 PM
http://www.aplusp8ntball.com/

They seem to make the best and you can get in a huge range of colors and style.
jabbster
07-13-2003, 06:08 PM
The clamping feed necks are on ebay. I believe that aplus paintball has a store on ebay. You could search in there, you cant miss them. Just search in paintball under angel. They are all over the place there. Hope this helps.

Sincerely,

The jabbster
paintballaholick
07-13-2003, 06:15 PM
yes...they do.U can also use elctrical tape.... the clamps grip that better!
jabbster
07-13-2003, 06:24 PM
Yes the clamping rises do. The electical tape gives a little and the grip is stronger. It is like when you grab a football, if it has a little give in it you can throw it further, why??? 'Cause your grip is stronger... See??? I am a genius huh???

Sincerely,

The jabbster
Devs
07-13-2003, 09:03 PM
Well, the day before my tourney, I picked up a Kapp Low-Riser. And it worked great. It has two set screws to keep the hopper from moving around. And it fits a lot better than the one that came with my LCD. And yes, Jabbster is a genius!

Monkey
JTp8ntballer12
07-18-2003, 12:04 PM
my tipmmann98 has a clamping feedneck....STOCK so beat that angel people
Absolution
07-18-2003, 06:16 PM
Demonic Strangler, or a CCM clamping neck. I have a CCM, but the Strangler works well too, it goes from high rise to lo-rise in seconds.

Plus, a lifetime warranty on the Strangler!
chief_roberts
08-09-2003, 02:59 AM
does anybody know where i can get a clamping HIGH rise? i've found tons in low, but my egg was sanded down to fit my bushy and it dosen't fit my new angel and i chop with a low rise. any imput would help thanks.