help cleaning my ir3

[thesoybomber]

yeah so i got the "grease service recommended" message, but i have absolutely no idea how to clean my gun. i read the message from

Originally posted by J.Fearing-AOG

1. You'll need to remove the RAM
2. You'll need to remove the LPR
3. You'll need to remove the exhaust valve & guide
4. You'll need to gut the mini-reg.

I'd start by completely wiping off any present grease, even if it looks good. Make sure all the o-rings/seals are in tact and clean everything.

1. Apply a generous coat of grease to the RAM body.
2. Apply a light coat of grease to the LPR spring stack and mini-reg spring stack.
3. Apply a light coat of grease to the exhaust valve guide seal.

You'll need to make sure that both the mini-reg and LPR spring stack are put back into place correctly. In addition, you'll need to readjust the ram, snap ring and possibly the LPR.


the problem is, there arent any angel techs nearby to do this for me, and i dont have a tool kit! is there anyone that can give me step by step directions on EXACTLY what to do, even if i dont have the toolkit? i mean i dont know how to remove all of those parts.

thanks in advance

[thesoybomber]

im in Nashville TN

is there any toolkit that costs less than $50? cause id really like to be able to do it myself.

[WarpedKid02]

I have only seen the toolkit for $50. You are pretty close to Warped-Sportz in Missouri or Indiana, or you could send it to Nebraska where HQ is for Warped-Sportz.

[C.Carles-AOG]

get the toolkit from www.angelparts.com and then read up here for help. get acquainted with the manual as well.

[The-One]

The is an Angel tech in Dalton, Ga. its 150 miles away from Nas. The website is theangelguy.com you might can catch him right now but he is leaving for florida for the world cup Fri. Also his tool kits are 45.00.